Baofeng UV-82 Disassembly

From Bloominglabs
Revision as of 10:15, 5 December 2017 by Gavwhela (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Baofeng UV-82 Because I could not find any instructions on the internet, here are instructions on how to disassemble the Baofeng UV-82 handheld transceiver.

Contents

Remove Belt Clip

2 small philps screws

Unclip Battery

3 unclip battery.jpg 4 remove battery.jpg

Remove Antenna and Volume Knob

5 unscrew antenna.jpg It just pulls straight off.

Unscrew Retaining Rings

7 remove antenna retainer.jpg 8 remove volume retainer.jpg

Pry Open Case

9 unpry bottom clips.jpg 10 bottom popped out.jpg

Remove Rear Case and Circuit Board

11 remove back.jpg

Remove Rubber Pieces

12 rubber jack seal.jpg 13 keypad.jpg

Disassembled

14 disassembled.jpg

Retrieved from "http://mail.bloomingtonfools.org/index.php?title=Baofeng_UV-82_Disassembly&oldid=3506"
Personal tools