Difference between revisions of "ClusterSysadminClass"
From Bloominglabs
(→February 21st and 28th, 2017) |
(→Cluster System Administrator Class) |
||
| Line 17: | Line 17: | ||
* Re-install nodes | * Re-install nodes | ||
* Set nodes to boot off local disk | * Set nodes to boot off local disk | ||
| + | * Setup TORQUE | ||
* [http://bloominglabs.org/images/0/0e/SysadminClass-Lecture3.pdf Lecture Notes] | * [http://bloominglabs.org/images/0/0e/SysadminClass-Lecture3.pdf Lecture Notes] | ||
* [http://bloominglabs.org/images/0/0f/SysadminClass3.tar.gz Config Files] | * [http://bloominglabs.org/images/0/0f/SysadminClass3.tar.gz Config Files] | ||
| + | * [http://bloominglabs.org/images/6/65/Torque-5.1.3-1-rpms.tar.gz TORQUE rpms] | ||
| + | * [http://bloominglabs.org/images/5/51/SysadminClass-Lecture4.pdf Lecture Notes for TORQUE] | ||
=== February 7th and 14th, 2017 === | === February 7th and 14th, 2017 === | ||
Revision as of 17:31, 28 February 2017
Contents |
Cluster System Administrator Class
Meeting: Tuesdays, starting January 24th until March 7th, from 7:00pm to 9:30pm
February 21st and 28th, 2017
- Setup iptables
- Setup NTP server
- Setup LDAP server (SLAPD)
- Setup NFS
- SSH security
- Re-configure kickstart
- Re-install nodes
- Set nodes to boot off local disk
- Setup TORQUE
- Lecture Notes
- Config Files
- TORQUE rpms
- Lecture Notes for TORQUE
February 7th and 14th, 2017
- Disable iptables/selinux
- Finish setting up DNS
- Setup DHCP
- Configure mgmt node's wired network port to use new DNS server
- Setup httpd
- Copy CentOS 6 installation files (CentOS/6.8/x86_64)
- Configure yum to use local repo
- Setup PXE server
- Modify DHCP to PXE boot
- Configure Kickstart config file
- Lecture Notes
- Config Files
January 31st, 2017
- Reinstall mgmt nodes with more full featured install
- Setup wireless networking on mgmt node
- Networking
- Lecture Notes
- Config Files
- #Errata: In dhcpd.conf, change the domain-name-server on line 30 to be 192.168.2.30
- This is fixed in current version of the tarball
- #Errata: In dhcpd.conf, change the domain-name-server on line 30 to be 192.168.2.30
January 24th, 2017
- Setup hardware
