Difference between revisions of "Exit Protocol"
From Bloominglabs
(leave door between workshop and meeting room open) |
|||
| Line 5: | Line 5: | ||
* The AC is set to ~70°f and energy saver mode, if summer. | * The AC is set to ~70°f and energy saver mode, if summer. | ||
* The thermostat is set to 60°f, if winter. | * The thermostat is set to 60°f, if winter. | ||
| + | * The door between the workshop and the meeting room is open. | ||
* That the laser/fan is powered off; and the vent is closed. | * That the laser/fan is powered off; and the vent is closed. | ||
* And that you turn the lights off. | * And that you turn the lights off. | ||
Revision as of 22:56, 29 July 2015
If you are the last person to leave the space, please take a minute and check the following:
- That there are no fires. If there are, would you kindly put them out?
- That the door by the welding station, the garage door, and the door by the laser room are shut and locked.
- The AC is set to ~70°f and energy saver mode, if summer.
- The thermostat is set to 60°f, if winter.
- The door between the workshop and the meeting room is open.
- That the laser/fan is powered off; and the vent is closed.
- And that you turn the lights off.
- And that whatever door you leave through locks behind you.
